No One Likes Screw Holes In fine Hardwood

Return to Mounted Gates Page

Holes are permanent and can never be completely hidden. The gate manufacturer has designed wood clamps to avoid the use of screw holes when possible. The following will assist you in selecting the proper clamp kit for mounting your Stairway Special or Duragate gates.

 

If....Your Hinge Post and Your Latch Post are Square at the Bottom and Round at the Top

Order

1- Square/straight Clamp

3- Round Clamps

Measurements are for the hinge side.

 

If....Your Hinge Post is Square at the Bottom and Round at the Top and your latch is mounting to the wall

Order

1 Square/straight Clamps

1 Round Clamps

 

 

 

If....Your Hinge Post and Your Latch Post are Square at the Bottom and Square at the Top

Order

4- Square/straight Clamps

 

 

 

If....Your Hinge is mounting to the wall and Your Latch is mounting to a Square Post

Order

2- Square/straight Clamps

 

 

 

If....Your Hinge Post and Your Latch Post are Square at the Bottom, Square at the Top and Round in the Middle and the distance from the floor to the top squared section is less than 28".   If the distance to the top squared section is greater than 28"  

Order

3- Square/straight Clamps

1- Round Clamp

If the distance to the top squared section is greater than 28"  

Order

                              3- Round Clamps

                              1- Square/straight Clamp

If....Your Hinge is mounting to the wall and Your Latch is mounting to a Round Post

Order

2- Round Clamps

 

 

 

   

If....You are mounting to Wrought Iron that is less than 3/4" in diameter/across

Order

1 – Wrought Iron Kit per side